|
|
|
|
|
|
|
|
|
|
|
|
|
|
Genesis Electric Drill, Amp Rating: 4.2 A, 3/8 in Chuck, Keyless Chuck, Includes: (4) Drill Bits, (1) Double-Ended Screwdriver Bit, Rubberized Non-Slip Grip Handle, Trigger Control, Gray/Green
|
Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high-speeds. 6 ft L cord, maximum hole diameter in hardwood is 3/8 in, softwood is 3/4 in, 120 V, 50-60 Hz, 2600 rpm no load speed and weighs 3.2 lb. Includes carrying bag.
|
Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. 0 to 1500 rpm, capacity in steel is 3/8 in, wood 1 in. Includes one double-ended screwdriving bit and storage bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for high-performance jobsites, the 3/8 in variable speed drill provides reliable power and durability for projects requiring extended tool usage. This drill is designed to provide the speed needed for a variety of drilling applications. The high-torque gear design makes the drill ideal for metal and wood fabrication, pilot hole drilling in deck building or frame construction and other applications requiring the extended runtime of a corded drill.
|
Featuring a 360 deg handle for added control, this 7 A 1/2 in drill/driver is powerful enough to handle tough applications. An all metal keyed chuck adds durability and increased bit retention. Variable speed enables controlled drilling and driving.
|
Genesis Drill, Amp Rating: 9 A, 1/2 in Chuck, Keyed Chuck, 6.5 ft Cord Length, Includes: Auxiliary Handle, Chuck Key with Holder, Rear Spade Handle, Gray
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DWD112 3/8 in VSR pistol grip drill with keyless chuck has a powerful 8 A motor to deliver 0 to 2500 rpm speed for heavy-duty applications. Features solid bit retention and a soft-grip handle design for comfort.
|
The DWE1014 3/8 in 0 to 2800 rpm VS drill with keyed chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 A motor drills at high-speed according to the user's desired setting.
|
Reliable performance on the toughest drilling applications. The power and durability of the 3/8 in drill make it the ideal tool for metal drilling, wood drilling and fastening applications. The powerful motor and variable speed trigger deliver speed for fast drilling, while the all metal gear case offers durability and excellent support in high torque applications. The soft-grip handle and two-finger trigger provide added comfort during prolonged use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Makita 6408K 3/8 in drill has a powerful 4.9 A motor with variable speed (0-2500) for a range of applications. Convenience features include a keyless chuck for fast and easy bit installation and removal and an in-line design with a large trigger switch for easy operation. The 6408 has a lower decibel rating (79dB) for quieter operation. The 6408K includes a Tool Case.
|
The DW235G 1/2 in VSR drill is constructed with helical-cut steel and heat-treated steel gears for long life and durability. Rubber grip and two-finger trigger provides comfort and control.
|
The DWD210G 1/2 in (13 mm) VSR pistol grip drill has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DWD215G 1/2 in VSR mid-handle grip drill with keyless chuck has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability.
|
Outperforms all other 1/2 in drills in its category. The 1/2 in Magnum? drill has the power and construction to deliver long-lasting performance. The all metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, textured grip and two-finger trigger optimize user comfort and balance.
|
The Makita 1/2 in drill (model DP4000) has a powerful 6.5 A motor for heavy-duty continuous work. It includes a large and conveniently located reversing switch and lock-on button. It contains a large two-position side handle for increased operator comfort and control and a convenient belt clip. Ideal for a range of drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DW130V 1/2 in spade handle drill features variable speed reversible switch to reduce air bubbles when mixing mud. 120 V motor delivers 0 to 550 rpm to increase torque for drilling and mud mixing. Lightweight and comfortable grip to minimize downtime.
|
The Makita 1/2 in spade handle drill (model DS4011) features a well-balanced design with a powerful motor engineered for constant power and speed for industrial drilling and mixing applications. The DS4011 has an 8.5 A motor that delivers 600 rpm for increased speed and torque, making it ideal for drilling large holes. The powerful motor is engineered for constant speed for efficient mixing performance. The DS4011 has a heavy-duty industrial 1/2 in drill chuck, with all ball bearing construction for smooth operation and longer tool life. The rocker switch makes it easy to quickly transition between forward and reverse operation. The D-handle rotates 360 deg with 24 positive stops for multi-position operation, with a rubberized grip for increased operator comfort and control. The DS4011 has a well-balanced design and weighs only 6.3 lb for reduced operator fatigue. The DS4011 is ideal for drilling large holes, with consistent speed that also makes it ideal for mixing.
|
This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle high-torque drilling and material mixing applications. Built for two-handed operation, the drill features extra-long handles for added leverage and control. You'll get quiet performance from the heat-treated, helical-cut gears.
|
|
|
Estimates