|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Center Punch, 1/4 in Tip, Shank Type: Hex, Shot Blast, 4 in L
|
Mayhew Prick Punch, 5/16 in Tip, Shank Type: Hex, Black Oxide, 4-1/2 in L
|
Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Made in the USA.
|
Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
|
Mayhew Prick Punch, 3/32 in Tip, Shank Type: Hex, Black Oxide, 4 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew Prick Punch, 3/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
|
Mayhew Pin Punch, 1/8 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Black Oxide, 4-1/2 in L
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications.
|
Pro Center Punch, 7/16 in Tip, Shank Type: Hex, Shot Blast, 5 in L
|
Mayhew Solid Punch with Hand Tag, 5/32 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations.
|
Mayhew Solid Punch, 1/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA.
|
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew Solid Punch with Hand Tag, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
|
Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations.
|
Line-up punches are used to align the holes through which rivets, pins or bolts will be inserted, but not for driving the hardware. Sizes vary for the optimal alignment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
Mayhew's line-up punches are used to align holes through which rivets, pins or bolts will be inserted. Available in variable point size, shank size and taper length for the ideal alignment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
|
Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials.
|
Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew's punches sets are both rugged and dependable. Available in numerous styles and sizes, you be able to tackle any application from masonry to metalworking, setting, driving, removing and more.
|
General Center Punch, 5/8 in Tip, Steel, Black Oxide, 5-5/8 in L
|
|
|
Estimates