|
|
|
|
|
|
|
|
|
|
|
|
|
|
Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering.
|
These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4 in Dia or less including CAT6 or RG type cables CAT 6, RG-6/U, RG-62A, RG-62/U to wood.
|
The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender low volt masonry staples secure bell, speaker, thermostat and telephone wire. The hardened nails can penetrate cement block, mortar and plaster surfaces.
|
The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.
|
The 3/16 in black polyethylene low-volt staples 25-pack feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration for indoor and outdoor use and are suitable for securing speaker, telephone, bell and other low-volt wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.
|
The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
The Gardner Bender 2-7/16 in x 1-1/16 in steel staples for 4/3 and 2/3 service entrance cable 10 pack install cable easily onto wood surfaces. These staples offer sharp offset legs that resist splitting wood and feature a burr-free construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Staples feature durable metal construction with a silver metallic finish and are 1/4 in (6 mm) W. Designed for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included) these staples cover a wide range of applications including securing television, CAT 5E, CAT 6 and RG-59 and computer cables. Quick to load, easy to install, these staples get the job done! Staple is also available in 5/32 in (4 mm) size under Model# MMS-3112 which covers telephone, alarm, security, doorbell, thermostat and speaker cable/wire.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. These Gardner Bender staples feature durable metal construction. The staples exhibits a silver metallic finish and are 5/32 in W. These staples are meant for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included). Staples cover a wide range of wire applications. Easy to load, easy to install.
|
The 1/4 in black polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are ideal for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer for quick and easy installation. 1 nail per staple for quick and easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. The Gardner Bender 1/4 in white polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are an excellent choice for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer.
|
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Insulated staples protect and secure NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. 40 per card.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
The Gardner Bender gray plastic service entrance cable straps for #2 SER cable 4 pack accommodate larger sized electrical cable. These straps offer zinc-plated nails for rust- and corrosion protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
Plastic insulated straps secure service entrance cable. Electro-zinc-plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
|
|
|
Estimates