Home > ELECTRICAL > ROUGH ELECTRICAL > FUSES & BREAKERS > FUSES-CARTRIDGE/LINKS/ADAPTER
Sort By:
1 2 3 4
Bussmann Fusetron NON-15 Cartridge Bussmann NON Cartridge Low Voltage Fast Acting Fuse Bussmann Fusetron NON-25 Cartridge
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.
Bussmann NON Cartridge Low Voltage Fast Acting Fuse Bussmann SC-20 Cartridge Low Voltage Time Delay Fuse Bussmann NON Cartridge Low Voltage Fast Acting Fuse
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. They have a minimum 300 V rating and are available up to 60 A. All SC fuses are 13/32 in Dia with varying lengths to provide a rejection feature that helps prevent over fusing (installing a 30 A fuse in a 20 A circuit). One half to 6 A SC fuses are fast-acting, while 7 to 60 A SC fuses are time-delay to permit temporary overloads to pass without nuisance openings. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.
Bussmann Fusetron NON-35 Cartridge Bussmann NON Cartridge Low Voltage Fast Acting Fuse Bussmann NON Cartridge Low Voltage Fast Acting Fuse
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.
Bussmann Fusetron NON-45 Cartridge Cooper Bussmann Fusetron FRN-R Non-Indicating Time Delay Fuse Cooper Bussmann Fusetron FNM Non-Indicating Time Delay Supplemental Fuse
Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Bussmann series Fusetron cartridge fuses are 23% more energy-efficient and offer the ideal time delay performance. Their dual-element feature allows closer sizing to load for excellent protection of motors and transformers. These Class RK5 fuses with a 200 kA interrupting rating can be used in a broad range of applications. When sized correctly, they help protect motors from burnout caused by overloads or single phasing. The time delay feature allows the initial startup current surge for typical motors to pass, but opens prior to motor burnout when longer, dangerous overloads are present. In addition, the dual-element design opens in as little as 0.004 secs if the fuse experiences short circuit conditions. All fuses are UL listed Class R (IR: 200 kA). Groove in end cap or notch in knife blade permit the fuse to be used in only Class H, Class K or Class R fuse blocks. Bussmann Time Delay Fuse, Cartridge, Supplemental, 250 V, 3 A, 100 A, 10 kA Interrupt, Element Type: Dual, Non-Indicating Indicator, Rejection, Ferrule, Holder Terminal, Melamine Body, Green, 13/32 in Diameter, 1-1/2 in Length
Cooper Bussmann Fusetron FNM Non-Indicating Time Delay Supplemental Fuse Cooper Bussmann Fusetron FNM Non-Indicating Time Delay Supplemental Fuse Cooper Bussmann Fusetron FNM Non-Indicating Time Delay Supplemental Fuse
Bussmann Time Delay Fuse, Cartridge, Supplemental, 250 V, 10 A, Interrupt Rating: 200 A, 10 kA, Element Type: Dual, Indicator Type: Non-Indicating, Rejection/Non-Rejection: Rejection, Terminal Type: Ferrule, Holder, Body Material: Melamine, Green, 13/32 in Dia, 1-1/2 in L Bussmann Time Delay Fuse, Cartridge, Supplemental, 250 V, 15 A, 10 kA Interrupt, Element Type: Dual, Non-Indicating Indicator, Rejection, Ferrule, Holder Terminal, Melamine Body, Green, 13/32 in Diameter, 1-1/2 in Length Bussmann Time Delay Fuse, Cartridge, Supplemental, 250 V, 20 A, Interrupt Rating: 10 kA, Element Type: Dual, Indicator Type: Non-Indicating, Rejection/Non-Rejection: Rejection, Terminal Type: Ferrule, Holder, Body Material: Melamine, Green, 13/32 in Dia, 1-1/2 in L
Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage
Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.
Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage
Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.
Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage
Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.
Bussmann Fusetron FRN-R Cartridge Current Limiting Low Voltage Cooper Wiring NO.263 Fuse Reducer Bussmann Fusetron NON-100 Cartridge
Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified. A NO.263 reducer installed on the fuse permits it to be installed in a 60 A fuse block. Reducers are particularly useful when equipment is being converted. Proper protection can be maintained without the expense of replacing the fuse block. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.
Bussmann SC-25 Auto Cartridge Low Voltage Time Delay Fuse Bussmann Fusetron NON-100 Cartridge Bussmann SC-30 Cartridge Low Voltage Time Delay Fuse
They have a minimum 300 V rating and are available up to 60 A. All SC fuses are 13/32in Dia with varying lengths to provide a rejection feature that helps prevent over fusing (installing a 30 A fuse in a 20 A circuit). One half to 6 A SC fuses are fast-acting, while 7 to 60 A SC fuses are time-delay to permit temporary overloads to pass without nuisance openings. Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. They have a minimum 300 V rating and are available up to 60 A. All SC fuses are 13/32 in Dia with varying lengths to provide a rejection feature that helps prevent over fusing (installing a 30 A fuse in a 20 A circuit). One half to 6 A SC fuses are fast-acting, while 7 to 60 A SC fuses are time-delay to permit temporary overloads to pass without nuisance openings.
   
 
1 2 3 4