|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Rafter Square, Graduation: 0.125 in, Measuring Angle: 90 deg, Polycast, Yellow, 7 in L
|
As a saw guide, stair layout tool or rafter tool, Johnson's 7 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
Works as a rafter square, try square, protract or a power saw guide. Lightweight compact heavy-duty ABS plastic body fits conveniently into pocket or tool belt. Detailed instruction book included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 8 in Speedlite? square is formed from lightweight, high-impact structural composite and is available in matte gray, high-visibility yellow and high-visibility orange. It's basically the same as the one and only Speed? square but is also great for use with siding and other delicate materials, since it won't mar soft finishes. Plus, its 8 in size means it's ideal for marking cuts in 8 in siding. Look for the Diamond?.
|
Use for quick and accurate measuring of rafter and angle layout. Includes instruction booklet.
|
The Stanley? Premium Quick Square? layout tool is engineered to provide a quick, accurate and repeating means for laying out and cutting the various cuts on common, valley, hip and jack rafters used in roof construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Solid heavy-duty aluminum extruded square will not bend, break, rust or corrode. Stamped conversion tables and thick edge makes for a safer saw guide.
|
This Johnny Square? is proudly made in the USA and is the first rafter square on the market to use a continuous scribing notch meaning you can mark and rip lumber to any size you want. This rafter square is solid aluminum die-cast and CNC-machined right here in Wisconsin. And, staying true to its Wisconsin roots, Johnson even included an integrated bottle opener in the center of the square. This square uses deep cast-in graduations that will never peel off, wear off, fade or smudge and also comes with a low-glare, protective powder-coated finish. It also features handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
The orange Big 12? Speedlite? square has the same basic features as the aluminum Big 12? Speed? square, but it is constructed of lightweight high-impact structural composite. The weight savings alone is great, but this tool is also ideal for use with siding and other delicate materials, since it will not mar softer finishes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 8 in Speedlite? level square is the only 8 in Speed? square on the market and also functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed? square, but is constructed of lightweight high-impact composite.
|
Functions as a saw guide, for special angle measurements and cuts or as a protractor. Aluminum construction for durability. Includes detailed instruction book.
|
Made of durable POLYCASTr material. Molded conversion tables. Easy to see graduations repeated on both sided. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unique tool is actually five tools in one like a try square, miter square, protractor, line scriber and saw guide. The Speed? square is constructed of durable heavy-gauge aluminum alloy. Includes markings for Swanson's one-number MethodSM of rafter layout and is packaged with the Swanson? blue book of rafter length and roof construction.
|
The Swanson? Speed? square was first developed by company founder Albert Swanson? in 1925. This innovative tool combines five tools in one like a try square, miter square, saw guide, line scriber and protractor. The Speed? square is die-cast for durability and accuracy. Made of heavy-gauge aerospace aluminum alloy, it is built to last. Black-filled gradations stand out against a matte finish for easy reading. The Speed? square includes the Swanson? blue book of rafter length and roof construction and also features markings for using the Swanson? One-Number? method of rafter layout. The Swanson? Speed? square is our most popular product and remains the most trusted square of its kind.
|
SCRIBE-GUIDET notches for marking at 1/2 in. and 1/4 in. increments. High visibility markings provide superior readability. 15% wider heel for a secure hold on all jobsite materials. Extruded aluminum more durable than die-cast. Anodized aluminum will not rust or corrode. Permanent laser etched markings provide 2X accuracy over standard stamped squares. On product link to rafter square user manual. Conversion tables for common application needs. Inch graduations. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Swanson Speed Square, Graduation: 1/16 in, Measuring Angle: 22.5, 30, 45 deg, Aluminum, Gray, 4-1/2 in W
|
As a saw guide, stair layout tool or rafter tool, Johnson's 12 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable, as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
To develop one of the world's premium rafter squares, Johnson first had to engineer the EZ-Read? finish, its revolutionary anti-glare protective coating that diffracts sunlight rather than reflecting it, so it looks as crisp in full sun as it does in the shade. The EZ-Read? finish also increases friction to better secure your square against your lumber when using it as a saw guide. The Johnny Square? is highly durable and accurate. Its solid aluminum body construction with CNC-machined edges ensure an accurate reading every time. This rafter square also features continuous scribing notches that are ideal for ripping at 3-1/2 in and 5-1/2 in as well as handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 4-1/2 in trim square is an everyday carry layout solution. The compact square is 35% smaller in size to easily fit into tight work spaces as well as your pockets and pouches. High-visibility laser etched markings will not wear off after heavy-use, providing you with consistent high-visibility throughout the life of the square. A 1/4 in and 3/8 in dual measurement heel also allows you to perform quick marks. The trim square is backed by our MILWAUKEE? limited lifetime warranty.
|
Introducing biggest evolution of the Swanson Speed Square in almost 100 years. The Speed Square PRO. This revolutionary layout tool born out of the true legacy tool, the Speed Square is packed full of new features and has the same reliable features you have always counted on from the Swanson speed square making layouts even faster and easier. The speed square PRO starts with all the incredible features of the original speed trim square, then takes it up a notch. From a new 22.5 deg angle coming off of the pivot for quick layouts to an additional 5-1/2 in diamond mark for working with 2 x 6 material. It also has 1-1/2 in edge used to measure the width of 2X material for quick framing. The Speed Square PRO is the world's most proficient tool designed for the true professional.
|
Solid aluminum extruded square will not bend or break and has graduated notches for pulling layout lines, stamped conversion tables. Mark or cut boards up to 12 in wide. Thicker frame design ensures safe use as a saw guide. Includes instruction manual with complete rafter tables.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Functions as a saw guide, bevel or protractor and is made of heavy-duty aluminum for durability. Comes with an adjustable arm and features Common, Jack and Hip and valley scales for various applications. Black body with yellow graduations provides maximum readability in all light conditions.
|
Our 7 in rafter square has a stronger frame and is the most versatile rafter square. Scribe notches from 1 to 6 in allow you to easily and accurately rip lumber. A 1 in cutout in the rafter square helps prop pipe allowing you to cut it more easily on the job site. A reinforced frame gives you more durability on the job site while high visibility laser etched markings make the square easier to read.
|
The Big 12? is seven tools in one like a framing square, try square, miter square, protractor, saw guide, stair gauge and out-of-square corner angle finder. It's constructed of heavy-gauge aluminum alloy and includes the layout bar for use in determining out-of-square corners. Also included are the Swanson? blue book for roof and stairway layout and layout bar with hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Big 12? is seven tools in one like a framing square, try square, miter square, protractor, saw guide, stair gauge and out-of-square corner angle finder. It's constructed of heavy-gauge aluminum alloy. It does not include the black gradations or the layout bar and hardware of the S0107 Speed? square.
|
As a saw guide, stair layout tool or rafter tool, Johnson's 12 in rafter square will help you get the job done accurately and easily. Its solid aluminum body construction with CNC machined edges provide greater accuracy and durability, while the low-glare, protective powder-coated finish makes the permanent graduations and numbers easy to read. This square also features scribe notches starting at 1-3/4 in that are useful when transferring outside increments from the pivot point and handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
To develop one of the world's premium rafter squares, Johnson first had to engineer the EZ-Read? finish, its revolutionary anti-glare protective coating that diffracts sunlight rather than reflecting it, so it looks as crisp in full sun as it does in the shade. The EZ-Read? finish also increases friction to better secure your square against your lumber when using it as a saw guide. The Johnny Square? is highly durable and accurate. Its solid aluminum body construction with CNC-machined edges ensure an accurate reading every time. This rafter square also features continuous scribing notches that are ideal for ripping at 1-1/2 in, 3-1/2 in and 5-1/2 in as well as handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Rafter Square, Graduation: 0.13 in, Measuring Angle: 90 deg, Aluminum, Blue, 12 in L, 11.9 in W
|
Crescent's full line of squares is ideal for the professional tradesmen who get the job done at all costs, with longevity and an investment in their craft. Equipped to perform in a variety of environments, Crescent squares allow you to easily complete multiple tasks. And with advanced design features that provide durability and maximum functionality, Crescent squares outlast the elements. In grit, dust or tough territory - there's a square for your unique application.
|
The Stiletto? 7 in carpenter square is designed with more layout notches to help you build faster. Additional notches aid in laying out 2 ft x 6 ft material, ripping boards and marking rafter pitches. The BOMBER? Cutout allows for repeatable stud measurements, while the bottom heel markings provide marking versatility. The 7 in carpenter square is fully machined, with an anti-glare finish and the most durable coating.
|
|
|
Estimates