|
|
|
|
|
|
|
|
|
|
|
|
|
|
5/16 x 3/4 in door bumpers used to keep door panels from slamming the Jamb. Installs with screws. Clear vinyl material.
|
Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.
|
The 3/4 in T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
M 6014 is a swinging shower door catch that mounts onto the swinging door frame. The stainless steel housing contains a spring-loaded plastic latch and is adjustable. The mounting holes (slots) are 1 in apart.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.
|
Injection molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape, included or snaps into extrusion fin. Used by several shower door manufacturers.
|
Clear vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.
|
M 6092 is a gray flat style shower door sweep that is 36 in long and 1-7/16 in wide and can be cut to size. It is held onto the swinging shower door by a metal drip rail that is located on the bottom of the door. Easy Installation - just remove the screws from the drip rail holding the old sweep and remove. Cut the new sweep to size, determine how far down the sweep needs to hang and install by replacing the drip rail over it and reinstalling the screws.
|
1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top hung, adjustable height, aluminum straight bracket, 3/4 in flat edge plastic, steel ball bearing wheel.
|
Gray vinyl, universal design, 1-1/2 in flat shape fits most older style drip rail systems. For use on hinged shower doors.
|
Clear acrylic self-adhesive commonly used on sliding medicine cabinets or mirrored doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray plastic bottom guide edge mounts onto base frame with screws. Fits 7/16 in thick panels.
|
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure. Clear vinyl material.
|
Sliding tub enclosure knob system through bolts into a 3/8 in Dia hole in the glass panel. Rubber trim acts as glass panel bumper. Used on frameless shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.
|
Extruded aluminum bracket with thru-glass 1/4 in binder post, 3/4 in flat edge plastic wheel and steel ball bearings. It is perfect for used on frameless shower doors.
|
Extruded aluminum adjustable brackets, round edge plastic wheel, steel ball bearings, used on frameless shower doors, up to 3/16 in thick glass. Includes gray gasket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear vinyl door bumper, self-adhesive. It is used to keep door panels from slamming the jamb.
|
Extruded aluminum bracket slides into slot on top of door. It has 3/4 in round edge plastic wheel, ball bearings and is used by Premier.
|
Bottom guide for sliding shower enclosure doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White plastic bottom guide used on framed tub enclosure doors.
|
Extruded aluminum adjustable bracket with glazing vinyl, chrome finish. It accepts up to 1/4 in thick glass panels and has 3/4 in OD round edge plastic wheel, steel ball bearings. It is perfect for use on frameless shower doors.
|
The 32 in chrome shower door towel bar set.
|
|
|
Estimates
