Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES > OUTLET BOXES
Sort By:
1 2 3 4
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.
Thomas & Betts BH122A-UPC Outlet Box Allied Moulded 1098-N Switch Box Raco 7887RAC Old Work Cable Box
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed. Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed. Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed.
Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box
New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed. Safe, non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in.
Thomas & Betts B114R-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box Allied Moulded 1099-N Switch Box
Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in. Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
BOX PVC SNGL GANG GRAY 8CU IN DEVICE BOX PVC 1 GANG 18.5CUIN Thomas & Betts SC100RR Low Voltage Box
GB Switch/Outlet Box, Outlet Type: Shallow, Cable Entry: Hinge, Number of Gangs: 1, Rectangular, Cubic Capacity: 8 cu-in, Dimensions: 1.25 in H x 2.4 in W x 4.25 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in.
BOX PVC SNGL GANG GRAY 18CU IN BOX PVC SNGL GANG GRAY 14CU IN Raco 8196 Electrical Box
GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 18 cu-in, Dimensions: 3.625 in H x 2.3125 in W x 2.75 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 14 cu-in, Dimensions: 4.38 in H x 2.25 in W x 2.75 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs Six 1/2 in and 3 TKO conduit knockouts (sides). Three 1/2 in and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mud ring/cover installation. FM bracket mounts flat on side of stud and provides a rigid, secure box installation. Square boxes are installed in ceiling or walls for lighting fixture or receptacles. 4 in square x 1-1/2 in D. 21 cu-in. UPC bar code. UL listed.
BOX PVC SNGL GANG GRAY 20CU IN Carlon SC100A 1-Gang Low Voltage Mounting Bracket Hubbell 519 Gangable Switch Box
GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 20 cu-in, Dimensions: 3.3 in H x 2.4 in W x 4.2 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73 in x 2.32 in. Four cable knockouts (end). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls.
Raco 8197 Welded Electrical Box Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box Thomas & Betts B120R Outlet Box
Raco Switch Box, Cable Entry: Conduit, Number of Knockouts: 13, Knockout Size: 1/2 in, Number of Gangs: 1, Square, Cubic Capacity: 21 cu-in, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel, Gray, Galvanized, Flush Mounting Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in.
DEVICE BOX HORZ 1GANG 22.5CUIN Raco 473 Gangable Switch Box Hubbell 8531 Gangable Switch Box
Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed. Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work switch box for easy installation of GFCI or other large devices. Use with a midi or oversized switch plate.
Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box DEVICE BOX PVC 1 GANG 22.5CUIN Raco 560 Gangable Switch Box
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed. For conduit. 3 in x 2 in switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14 cu-in capacity, 2-3/4 in deep, four 1/2 in side knockouts, two 1/2 in bottom knockouts and two 1/2 in end knockouts. Acceptable for use in 2 hrs rated fire walls. UL listed.
   
 
1 2 3 4